Skip to main content

Assessing the Feasibility of Incorporating Phase Change Material in Hot Mix Asphalt

This paper investigated the feasibility of using lightweight aggregate (LWA) as a medium for incorporating phase change material (PCM) in hot mix asphalt (HMA) in order to extend pavement life by reducing the magnitude of temperature fluctuations.

Published onJan 19, 2020
Assessing the Feasibility of Incorporating Phase Change Material in Hot Mix Asphalt
·

Abstract

This paper investigated the feasibility of using lightweight aggregate (LWA) as a medium for incorporating phase change material (PCM) in hot mix asphalt (HMA) in order to extend pavement life by reducing the magnitude of temperature fluctuations. First, evaporation and absorption tests were conducted to investigate the absorption properties of LWA and the loss of PCM during heating. Then, batches of samples with varying concentrations of PCM were created and the thermal properties were evaluated using a guarded longitudinal comparative calorimeter (GLCC). Data from thermal testing indicated that the incorporation of PCM slowed the rate of cooling and reduced low temperatures when compared to control samples. Further research should investigate PCM incorporation methods, improve the mix design, and experiment with different combinations of PCMs and thermal fluctuations.

Read the full article.

Manning, B., Bender, P., Cote, S., Lewis, R., Sakulich, A., & Mallick, R. (2015). Assessing the feasibility of incorporating phase change material in hot mix asphalt. Sustainable Cities and Society, 19, 11–16. https://doi.org/10.1016/j.scs.2015.06.005

*denotes a WPI undergraduate student author

Comments
0
comment
No comments here
Why not start the discussion?